<?xml version="1.0" encoding="UTF-8"?><!-- generator="WordPress/2.9.2" -->
<rss version="0.92">
<channel>
	<title>IT Support - Computer Aided Design</title>
	<link>http://www.altcontrolit.com</link>
	<description>IT Support - Computer Aided Design</description>
	<lastBuildDate>Wed, 20 Jan 2010 09:32:37 +0000</lastBuildDate>
	<docs>http://backend.userland.com/rss092</docs>
	<language>en</language>
	
	<item>
		<title>The OSI Model</title>
		<description><![CDATA[The Open System Interconnection Reference Model (OSI Reference Model or OSI Model) is an abstract description for layered communications and computer network protocol design.]]></description>
		<link>http://www.altcontrolit.com/cisco/the-osi-model.html</link>
			</item>
	<item>
		<title>Autodesk AutoCAD File Versions</title>
		<description><![CDATA[Sometimes older AutoCAD software is unable to open files created in newer versions. If you want to find the version of a DWG file you can right click on it and open it in notepad ...]]></description>
		<link>http://www.altcontrolit.com/autodesk/autodesk-autocad-file-versions.html</link>
			</item>
	<item>
		<title>VLAN Trunking Protocol</title>
		<description><![CDATA[Most networks will have more than one switch. As a network administrator you don&#8217;t really want to have to go around and manually configure the VLAN information on each of these switches especially in a ...]]></description>
		<link>http://www.altcontrolit.com/cisco/vlan-trunking-protocol.html</link>
			</item>
	<item>
		<title>Cisco Switch VLAN&#8217;s</title>
		<description><![CDATA[Switches have one broadcast domain by default, therefore a copy of a broadcast sent out by a host plugged into this switch will be received by all of the other attached hosts. The diagram below ...]]></description>
		<link>http://www.altcontrolit.com/cisco/cisco-switch-vlans-2.html</link>
			</item>
	<item>
		<title>Cisco Show Interface Command</title>
		<description><![CDATA[One of the most used Cisco commands is the show interfaces command. Running this command will give you an output of all the configurations on each of the interfaces on the switch or router. To ...]]></description>
		<link>http://www.altcontrolit.com/cisco/configure-a-range-of-ports-on-a-cisco-device.html</link>
			</item>
	<item>
		<title>Extend The Windows Server 2008 Evaluation Period</title>
		<description><![CDATA[Windows Server 2008 may be installed and evaluated for a period of 60 days. This evaluation period can be extended or re-armed a further three times giving a total evaluation period of 240 days!
To begin ...]]></description>
		<link>http://www.altcontrolit.com/microsoft/extend-the-windows-server-2008-evaluation-period.html</link>
			</item>
	<item>
		<title>Microstation Previous Selection</title>
		<description><![CDATA[Have you ever spent ages selecting elements within a design and then accidentally cleared your selection? If so there is a Microstation key-in that will activate your previous selection. Open a key-in window and type ...]]></description>
		<link>http://www.altcontrolit.com/bentley/microstation-previous-selection.html</link>
			</item>
	<item>
		<title>Server 2008 Editions</title>
		<description><![CDATA[Windows Server 2008 Standard Edition

The 32 bit version supports a maximum of 4Gb of RAM and up to Four processors in a Symmetric Multi-Processing (SMP) configuration.
The 64 bit version supports a maximum of 32Gb of RAM ...]]></description>
		<link>http://www.altcontrolit.com/microsoft/server-2008-editions.html</link>
			</item>
	<item>
		<title>Microstation Control Points</title>
		<description><![CDATA[When creating a B-spline curve sometimes the points are still visible after you have finished drawing with the tool as shown below.



The display of these control polygons can be turned on and off by using ...]]></description>
		<link>http://www.altcontrolit.com/bentley/microstation-control-points.html</link>
			</item>
	<item>
		<title>Windows 2008 Server Core Ocsetup.exe Packages</title>
		<description><![CDATA[The Ocsetup command in Windows Server Core allow you to add features and should be used in the following syntax ocsetup DHCPServerCore. Remember that the command line names are case sensitive!
You can remove features by ...]]></description>
		<link>http://www.altcontrolit.com/microsoft/windows-2008-server-core-ocsetup-exe-packages.html</link>
			</item>
</channel>
</rss>
