Articles tagged with: Switches
Most networks will have more than one switch. As a network administrator you don’t really want to have to go around and manually configure the VLAN information on each of these switches especially in a …
Switches have one broadcast domain by default, therefore a copy of a broadcast sent out by a host plugged into this switch will be received by all of the other attached hosts. The diagram below …
One of the most used Cisco commands is the show interfaces command. Running this command will give you an output of all the configurations on each of the interfaces on the switch or router. To …
If you dont know what the enable password or enable secret password is on a router or switch you can reset it by using the information below.
Power cycle the router or switch and press Ctrl+Break on …
By default the passwords on Cisco routers and switches are saved in the configuration unencrypted. The only password that gets encrypted is the enable secret one. to encrypt all passwords on a Cisco router or …
